Product Description

The Firearms Clearing Holster (FCH) is an Australian designed and manufactured ballistic weapon clearing holster which has been in use with Australian Law Enforcement Agencies since 2001.

The FCH was originally designed and manufactured for the AFP and Sky Marshalls as a bullet proof brief case. After testing and acceptance, the brief case model was used successfully by these agencies. It has since been improved and evolved into a portable firearm clearing holster providing the same level of protection and safety for all unloading operations.

The FCH is constructed from a bulletproof material and has been tested to NIJ standards 0108.01 Level 111-A (44 Magnum; Submachine gun 9mm).

The FCH was designed to facilitate the safe unloading of pistols in operational environments, and can accommodate popular semi auto pistols, all Glock models and S&W M&P models with light.

The molded holster is designed to fit specific handguns to ensure that the barrel is aligned so that an accidental discharge is aimed at the centre of the pad and precludes any chance of the projectile striking the seam junction.

It is widely used across Australia by multiple AFP and Police personnel in each state.

Features

• NIJ standards 0108.01 Level 111-A
• Custom molded to fit various type of handguns
• A strap is placed around the grip to secure the hand-gun during operation. Optional handle can be added for better grip during operation
• Vented design to deflect any discharge gasses from the user.
• Service life of 10 years

Product Description Covert bag for firearm, spare magazine, OC spray, telescope, baton and handcuffs. Great for carrying in areas where public open carry is deemed offensive. Tear down bag front for rapid access to firearm. Reflective “POLICE” ID sign is removable or different ID label can be fitted. L&R Versions. Black, Grey, OD and CAM colours available. The Tac Bag is designed for carrying a firearm, ASP baton and “Pepper” spray discretely for under cover police or security personnel. The tac bag is manufactured from 1000 dernier cordura and all components are hot knife cut to ensure that this is the most robust pack available and will give years of service. Also available is a Tac bag for off road motorcycle and marine use. This tac bag has a 4mm stainless steel cable through the belt webbing for extra security. Features:

• Standard – fits 4’’ Barrel Revolvers and Auto pistols 9mm to .45.
• Holster can be made to suit Sure Fire light system upon request.
• Molded Safaril and holster can also be added upon request.
• Pull down front zip for rapid access to pistol and presentation of light reflective ID label. (Label is Removable/Interchangeable “POLICE” or “SECURITY”.)
• Discreet zip access to pistol.
• Security tab so that the front does not peel open due to weight of ASP baton etc.
• Spare mag elastic loop in main pocket.
• Pepper spray elastic loop in main pocket.
• Flexi cuff loops.
• 40mm wide belt to spread load of tac bag uniformly around waist.
• Double Snap release lock to secure tac bag against bag snatchers.
• Heavy duty elastic holster for snug fit of pistol. Specify weapon when ordering.
• Thumb break on adjustable retaining strap to secure pistol when pack is open.
• Colour: Black. Other colour available on request.
• Custom tool kits can be ordered to fit Lock Picks and Phone tap tools.

Product Description The SR-10 Pool Hoist has been designed and built to exceed hospital and rehabilitation standards for the  stable and safe entry  of users into hospital and aquatic centre pools. The hoist offers a fully automated electric control system with a high quality 316 stainless steel construction offering a durable investment with a large 250kg carrier bed able to cater for up to 99% of user requirements.   It comes with a a battery backup and manual system to allow safe operation in the case of power failure. The SR-10 Pool hoist is a state of the art construction and is a durable investment for organisations that have the safety, comfort and health of their users and staff as a primary concern. Benefits

• Fully automated providing smooth operation of patient handling
• Large seat design (no slings) for comfort and stability
• Max 180 degree swivel turn
• Safe design & sustainable engineering- no residues
• Easy adjustment by staff, carers and clients
• Maximum comfort and client safety and security

Features

• 10 automated fully adjustable functions
• Water protected LINAK IPX6 Actuators (no fluids)
• Made with 304 grade stainless steel
• Operated by 240v power with battery and manual backup
• Simple to use hand controller
• Manual backup system in loss of power
• 250kg working load

Specification

• Seat Width – 55cm
• Seat Minimum Height - 65cm
• Seat Max Height – 95cm
• Seat Weight Capacity 300kg
• Seat Tilt angle – 15 Degrees
• Backrest angle – 150 Degree’s
• Leg Rest Width – 55cm

Other Specs

Motor:	24V Permanent Magnet Motor
Actuator:	24V Electric Actuator
Battery charger:	24V 30A battery charger
Backup batteries:	12V AGM Battery x 2
Materials:	316 Stainless steel base plate, base cover, hoist arms and seat Galvanized mild steel main pole
Safe Working Load:	250kg

Product Description

• OCL Strop is primarily designed for Conventional Infantry and Special Forces personnel being transported in the Black Hawk Helicopter. The OCL Strop as part of the Helicopter Restraint System (HRS) secures passengers within the rear cabin of Australian Army rotary wing aircraft when seats have been removed or are unusable.
• The OCL Strop is intended to restrict an individual’s movement by means of a line anchorage which will physically prevent the tethered user weighing  150 kg from reaching a position at which there is a risk of a free or limited free fall.
• The OCL Strop comprises a line that has integral energy absorbing properties, with attachment points at both ends, forming a manufactured assembly designed to be tamper evident if the attachment point has been opened or broken.
• The OCL Strop is to be of lightweight design that is easily carried by an individual when they depart the aircraft.

Product Specs

• NSN Number: 1680/661564569
• The Lanyard is a flexible line or strap that has a QRD at each end for connecting the individual to specified attachment point(s). It has a specified breaking strength and integral energy absorbing properties or a personal energy absorber attached designed to handle a static load of 18 Kn without permanent distortion and can manage a user weighing 150 kg including their combative gear. Models are also available for up to 18okg
• The OCL Strop is comprised of a Lanyard with a quick release shackle on each end. This enables an individual to attach and release to designated attachment points. This mechanism is commonly referred to as a Quick Release Device (QRD).
• The attachment hardware is able to sustain  the full loading of a tethered person being thrown forward into the pilot area in the event of a rapid manoeuvre or an inadvertent fall from the aircraft

Benefits

• Minimise Manual Lifting
• Facilitate ease of transfer from bed to chair
• Easy adjustment by staff, carers and clients
• Maximum Comfort and client security
• Increases safety and reduces transfer

Features

• 10 automated fully adjustable functions
• Simple Push Button Operation
• Water Protected IPX6 Actuators
• Operated by 12v Lithium Re-chargeable battery
• Pivot Armrest
• Hospital Grade Lockable castors
• Removable Bed Pan Lid
• 200kg Max Load Limit

Specification

• Seat Width – 55cm
• Seat Minimum Height - 65cm
• Seat Max Height – 95cm               
• Seat Weight Capacity 200kg
• Seat Tilt angle – 15 Degrees     
• Backrest angle – 150 Degree’s
• Leg Rest Width – 55cm      

Product Description The dog kennel and box were designed in conjunction with the Victorian Police Dog Squad to provide secure and stable housing for the police dogs. The process of design, prototype and testing took over 2 years to complete but the final product was everything asked for and fit for purpose. The galvanized steel frame and mesh is sturdy, durable and long lasting. It is easily assembled on site and can be disassembled and transported as a flat pack to a new location. The studded floor is modular and made from recycled HDPE that is water, mold and rot proof material. It is manufactured by Aerochute Industries in Coburg Victoria from locally sourced materials. All sides are constructed on jigs so fit together easily with part numbers. Replacement parts will fit with existing frames. Specifications.

• Frame: Galvanized mild steel with 50x50mm galvanized steel mesh
• Roof: Zinc corrugated sheeting with flashing
• Floor: Recycled LT Grey HDPE Stud Mat 12mm On a galvanized steel 25x25mm frame
• Box: Recycled LT Grey HDPE Smooth Mat 7mm Weathertex groove Panel 9.5mm painted Back slides open for washing
• Door:  Opens inside and out with locking mechanism

Dimensions

• Run:- Length - 2.5m Width - 2.0m Height - 2.0m
• Box:- Length - .950m Width - 1.20m Height – 1.125m

Product description For use Occupational Therapy and rehabilitation clinics for the storage of equipment such as exercise balls and assistive tools. C. Professional look with venetian style shelving tiers for adaptable layout. Can be custom made and installed to suit any clinic requirements Specifications

• Wall mounted
• Sturdy construction materials and design
• Fully installed and wall mounted
• Customised to any specifications

Product Description From acute care to homecare and everything in between we can custom design a range of medical bed frames to fit every patient and hospital need. Made from durable powder coated mild steel Specifications

• Mild steel frames
• Powder coated
• 50mmx50mm mesh
• Wall and roof mounted installation

Product Description Use for posture correction excercises, the standing mirror provides full tilt capabilities whiteboard on back steady frame and castor for easy mobility. Sturdy frame and mobility with whiteboard on back we can custom make to your clinics requirements Specifications:

• Adjustable angle mirror can be locked at any angle.
• 120 x 50cm mirror in mounted in sturdy powder-coated steel frame.
• Whiteboard on back side of mirror providing extra dimension of use.
• Frame mounted on 50mm Castors for easy movement.
• Customisable to required specifications as required

 

Product Description The Police Belly band is for the primary carriage of concealed equipment including pockets firearm, light, spare magazine OC spray AS baton, Radio antennae, flexi cuffs. It is designed for concealment under the shirt that has covert requirements and can be adapted to include shoulder straps for extra support, tie downs and comes in four different size requirements. Product Specs

• Made with HD boot elastic constructed with milspec stitching
• Velcro adjustment with stretch material worn tight for concealment or loose for comfort
• Stretch pockets for variable sizes in equipment
• Sizing small, medium, large, extra large

Product Description Features

• Elastic holster with thumb brake
• Velcro safety strap
• Detachable shoulder straps
• shoulder strap antenna option
• Accessory Holders
  • Radio pouch
  • ASP Baton Strap
  • OC Holder
  • Magazine holder

Specifications

• Made of high high Grade Boot Elastic
• Mil-spec covered edging (no fray, stretch or warping of belt shape)
• Parachute grade stitching
• Class 1 tape used

Product Description Covert bag for firearm, spare magazine, OC spray, telescope, baton and handcuffs. Great for carrying in areas where public open carry is deemed offensive. Tear down bag front for rapid access to firearm. Reflective “POLICE” ID sign is removable or different ID label can be fitted. L&R Versions. Black, Grey, OD and CAM colours available. The Tac Bag is designed for carrying a firearm, ASP baton and “Pepper” spray discretely for under cover police or security personnel. The tac bag is manufactured from 1000 dernier cordura and all components are hot knife cut to ensure that this is the most robust pack available and will give years of service. Also available is a Tac bag for off road motorcycle and marine use. This tac bag has a 4mm stainless steel cable through the belt webbing for extra security. Features:

• Standard – fits 4’’ Barrel Revolvers and Auto pistols 9mm to .45.
• Holster can be made to suit Sure Fire light system upon request.
• Molded Safaril and holster can also be added upon request.
• Pull down front zip for rapid access to pistol and presentation of light reflective ID label. (Label is Removable/Interchangeable “POLICE” or “SECURITY”.)
• Discreet zip access to pistol.
• Security tab so that the front does not peel open due to weight of ASP baton etc.
• Spare mag elastic loop in main pocket.
• Pepper spray elastic loop in main pocket.
• Flexi cuff loops.
• 40mm wide belt to spread load of tac bag uniformly around waist.
• Double Snap release lock to secure tac bag against bag snatchers.
• Heavy duty elastic holster for snug fit of pistol. Specify weapon when ordering.
• Thumb break on adjustable retaining strap to secure pistol when pack is open.
• Colour: Black. Other colour available on request.
• Custom tool kits can be ordered to fit Lock Picks and Phone tap tools.

Product Description Low profile covert carry on hip for firearm OC, baton, MAG. Tear down front firearm access & option reflective “POLICE” label. Black, Tan, Olive and Grey colours available. Specifications

• 1000d Cordura construction
• Milspec tape and stitching

Product Description For Left to right carry of firearms, spare magazines and other equipment OC spray or Baton. Used in bodyguard and security work Specifications

• 1000d Cordura
• Milspec webbing tape, stitching

Product Description For use in first response medical aid. Specifications

• 1000D Cordura
• 2” wide webbing belt loop
• Velco closure
• 3/4” wide 400lb binding MIL-T-5038 Type 3 Class 1 webbing

Product Description Cordura shoulder bag for covert carry of firearm, MAG, OC, Radio with antenna & Mike in shoulder strap. Push to talk button squeeze bag. Can be opened for inspection in shops without showing police kit. Specifications Materials: Cordura

Product Description Leather shoulder bag for covert Carry of firearm, MAG, OC, Radio with antenna & Mike in shoulder strap. Push to talk button squeeze bag. Can be opened for inspection in shops without showing police kit. Specifications

• Leather construction

Product Description For the side carry of ASP Baton, OC Spray, Handcuffs attaches to belt. Product Specifications

• 1000 Denier Cordura/Foam.
• Slides on to duty belt.
• Convenient ON/OFF pad to carry baton,
• OC and handcuffs.
• Loop for extended baton carry.

   

Product Description Strong neck lanyard for use with Id Card holders, access passes or other requirements. strong  Milspec webbing and stainless steel fittings construction Specifications

• 6mm 316 stainless steel spring hook with locking screw gate
• 625lb strength MIL-T-5038 Type 4 webbing Class 1
• 800mm±5mm long
• Federal standard N⁰7551 Stitches, seams and stitching

Product Description Protective cover for identification cards and similar. Durable strong and long lasting. Only ever need one Specifications

• 28mm Nickel Plated flat key ring
• 625lb strength MIL-T-5038 Type 3 webbing tape
• 1000D Cordura construction
• 3/4” wide 400lb binding MIL-T-5038 Type 3 Class 1 webbing
• High density PE foam insert
• Federal standard N⁰7551 Stitches, seams and stitching

Product Description Combined Keycard holder and Lanyard Specifications • 28mm Nickel Plated flat key ring • 625lb strength MIL-T-5038 Type 3 webbing tape • 1000D Cordura • 3/4” wide 400lb binding MIL-T-5038 Type 3 Class 1 webbing • High density polyethylene insert • Federal standard N⁰7551 Stitches, seams and stitching • 6mm 316 stainless steel spring hook with locking screw gate • 625lb strength MIL-T-5038 Type 4 webbing • 800mm±5mm long • Federal standard N⁰7551 Stitches, seams and stitching

Product Description The dog kennel and box were designed in conjunction with the Victorian Police Dog Squad to provide secure and stable housing for the police dogs. The process of design, prototype and testing took over 2 years to complete but the final product was everything asked for and fit for purpose. The galvanized steel frame and mesh is sturdy, durable and long lasting. It is easily assembled on site and can be disassembled and transported as a flat pack to a new location. The studded floor is modular and made from recycled HDPE that is water, mold and rot proof material. It is manufactured by Aerochute Industries in Coburg Victoria from locally sourced materials. All sides are constructed on jigs so fit together easily with part numbers. Replacement parts will fit with existing frames. Specifications.

• Frame: Galvanized mild steel with 50x50mm galvanized steel mesh
• Roof: Zinc corrugated sheeting with flashing
• Floor: Recycled LT Grey HDPE Stud Mat 12mm On a galvanized steel 25x25mm frame
• Box: Recycled LT Grey HDPE Smooth Mat 7mm Weathertex groove Panel 9.5mm painted Back slides open for washing
• Door:  Opens inside and out with locking mechanism

Dimensions

• Run:- Length - 2.5m Width - 2.0m Height - 2.0m
• Box:- Length - .950m Width - 1.20m Height – 1.125m

Product Description

The Firearms Clearing Holster (FCH) is an Australian designed and manufactured ballistic weapon clearing holster which has been in use with Australian Law Enforcement Agencies since 2001.

The FCH was originally designed and manufactured for the AFP and Sky Marshalls as a bullet proof brief case. After testing and acceptance, the brief case model was used successfully by these agencies. It has since been improved and evolved into a portable firearm clearing holster providing the same level of protection and safety for all unloading operations.

The FCH is constructed from a bulletproof material and has been tested to NIJ standards 0108.01 Level 111-A (44 Magnum; Submachine gun 9mm).

The FCH was designed to facilitate the safe unloading of pistols in operational environments, and can accommodate popular semi auto pistols, all Glock models and S&W M&P models with light.

The molded holster is designed to fit specific handguns to ensure that the barrel is aligned so that an accidental discharge is aimed at the centre of the pad and precludes any chance of the projectile striking the seam junction.

It is widely used across Australia by multiple AFP and Police personnel in each state.

Features

• NIJ standards 0108.01 Level 111-A
• Custom molded to fit various type of handguns
• A strap is placed around the grip to secure the hand-gun during operation. Optional handle can be added for better grip during operation
• Vented design to deflect any discharge gasses from the user.
• Service life of 10 years

Product Description Adaptable soft holster capable of being worn Right hand hip or Left hand grip forward for seated access with RH as well as inside the waistband. Spare MAG on front of holster. Available in LH. Can be designed to fit other handguns Product Specifications

• 1000D Cordura material constructio
• Milspec tape and stitching

 

Product Description Inside the waistband Holster for subtle concealment of firearm. Designed firearm to be 'tucked inside pant waistband Specifications

• 1000D Cordura materials
• Milspec tape and stitching construction

Product Description A low profile flush fit pancake holster for wide body support of firearm to hold firm to person both left and right hand design Product Specs

• 1000D Cordura Construction
• Milspec stitching
• Padded sandwich construction
• Low profile design

Product Description Used for concealment of backup firearm or convenient storage for Air Marshalls Specifications

• 1000D Denier Construction
• Milspec taping, stitching
• Highly durable

Product Description The custom prone harness is specially designed for lifting people in prone positions   Specifications

Product Description   Specifications

Product Description 1000 Denier Cordura Militairy Grade Harness for the ultimate in safety, reliability and comfort.  Made with High Strength Webbing stainless Quick Adjustors and Tool storage rings. Specifications 

• 1000 Denier Corduara
• 10mm EV Foam support
• 6x 25mm Wekded D Rings for tool storage
• 2x H33755 Quick Fit Adapters
• 1x H333 55 Adapter
• 1xH 302 D Ring Wide Mouth
• 4x H309 Angled D Ring
• 2x H303 D Ring
• 1x 1”55 Tribar

Product Description   Specifications

Product Description   Specifications

Product Description

• OCL Strop is primarily designed for Conventional Infantry and Special Forces personnel being transported in the Black Hawk Helicopter. The OCL Strop as part of the Helicopter Restraint System (HRS) secures passengers within the rear cabin of Australian Army rotary wing aircraft when seats have been removed or are unusable.
• The OCL Strop is intended to restrict an individual’s movement by means of a line anchorage which will physically prevent the tethered user weighing  150 kg from reaching a position at which there is a risk of a free or limited free fall.
• The OCL Strop comprises a line that has integral energy absorbing properties, with attachment points at both ends, forming a manufactured assembly designed to be tamper evident if the attachment point has been opened or broken.
• The OCL Strop is to be of lightweight design that is easily carried by an individual when they depart the aircraft.

Product Specs

• NSN Number: 1680/661564569
• The Lanyard is a flexible line or strap that has a QRD at each end for connecting the individual to specified attachment point(s). It has a specified breaking strength and integral energy absorbing properties or a personal energy absorber attached designed to handle a static load of 18 Kn without permanent distortion and can manage a user weighing 150 kg including their combative gear. Models are also available for up to 18okg
• The OCL Strop is comprised of a Lanyard with a quick release shackle on each end. This enables an individual to attach and release to designated attachment points. This mechanism is commonly referred to as a Quick Release Device (QRD).
• The attachment hardware is able to sustain  the full loading of a tethered person being thrown forward into the pilot area in the event of a rapid manoeuvre or an inadvertent fall from the aircraft

Product Description   Specifications

Product Description 1000 Denier Cordura/Foam construction with snap stud belt loop attachment. Side release buckle with shock cord radio retention. Specifications

• 1000 Denier Cordura Foam construction
• Snap stud belt loop attachment.
• Side release buckle with shock cord radio retention.
• Small, Medium and Large.
• Custom colour and design options available.

Product Description 1000 Denier Cordura/Foam construction with snap stud belt loop attachment. Side release buckle with shock cord radio retention. Specifications

• Small, Medium and Large.
• Custom colours available.

Product Description Cordura chest pack for easy access to radio on work sites or crowd scenes. Black, Red, Blue, Tan, Flouro Yellow and Orange colours available. Specifications

• 1000D Cordura construction
• Milspec tape and stitching
• Range of colours

Product Description 1000 Denier Cordura/Foam construction with snap stud belt loop attachment. Side release buckle with shock cord radio retention. Custom colours available Specifications

• Sandwich of 1000D Cordura
• 3mm EVA foam
• 420D Nylon 3/4” MIL-T-5038 Type 3 tape
• 18mm plastic side release buckle
• 3mm shock cord
• 38mm polyester webbing
• Federal standard N⁰7551 Stitches, seams and stitching

Product Description For the side carry of ASP Baton, OC Spray, Handcuffs attaches to belt. Product Specifications

• 1000 Denier Cordura/Foam.
• Slides on to duty belt.
• Convenient ON/OFF pad to carry baton,
• OC and handcuffs.
• Loop for extended baton carry.

   

Product Description Strong neck lanyard for use with Id Card holders, access passes or other requirements. strong  Milspec webbing and stainless steel fittings construction Specifications

• 6mm 316 stainless steel spring hook with locking screw gate
• 625lb strength MIL-T-5038 Type 4 webbing Class 1
• 800mm±5mm long
• Federal standard N⁰7551 Stitches, seams and stitching

Product Description Protective cover for identification cards and similar. Durable strong and long lasting. Only ever need one Specifications

• 28mm Nickel Plated flat key ring
• 625lb strength MIL-T-5038 Type 3 webbing tape
• 1000D Cordura construction
• 3/4” wide 400lb binding MIL-T-5038 Type 3 Class 1 webbing
• High density PE foam insert
• Federal standard N⁰7551 Stitches, seams and stitching

Product Description Combined Keycard holder and Lanyard Specifications • 28mm Nickel Plated flat key ring • 625lb strength MIL-T-5038 Type 3 webbing tape • 1000D Cordura • 3/4” wide 400lb binding MIL-T-5038 Type 3 Class 1 webbing • High density polyethylene insert • Federal standard N⁰7551 Stitches, seams and stitching • 6mm 316 stainless steel spring hook with locking screw gate • 625lb strength MIL-T-5038 Type 4 webbing • 800mm±5mm long • Federal standard N⁰7551 Stitches, seams and stitching

Product Description Specifications

• Sandwich of 1000D Cordura, 3mm EVA foam
• Federal standard N⁰7551 Stitches, seams and stitching
• 420D Nylon 3/4” MIL-T-5038 Type 3 tape
• 18mm plastic side release buckle
• 38mm polyester webbing

 

The twin zip mesh jumpsuit has integrated anchor points along both front and back, left and right side. There is also a waist anchor belt that has stainless steel rings, left and right side and centre front and back. The belt and rings are designed so that one ring has a design strength of 2000lb (909kg) and results in a working load limit of 181kg.

The two shoulder anchor points are reinforced and each one is also capable of a WLL 181 kg.

In use the wearer can be suspended in various attitudes from several anchor points using shock cord or non-stretch lines. Two safety anchor points must always be used as a back-up either at both shoulder points or two waist belt rings. The safety lines should have a minimum break strength of 2000lb (909kg) each.

Customised anti Gravity Suit

• The Leg Assist allows carers to assist clients to move legs or arms during a range of daily activities.
• The Leg Assist provides a non-slip grip for the safety and security of clients during daily activities.
• The Velcro band allows easy application and removal and is designed to comfortably wear over existing clothing.
• Two sizes, single or double

• The Rescue Bed can be used in case of fire or other emergencies to assist the carer in quick and safe removal of the client.
• The Rescue Bed has side handles for easy access from a bed and a large top handle for a positive, non-slip grip for quick removal of the client by the carer.
• Constructed of lightweight, durable and waterproof material. Quick release buckles allows for easy attachment and adjustment.

Product Description The SR-10 Pool Hoist has been designed and built to exceed hospital and rehabilitation standards for the  stable and safe entry  of users into hospital and aquatic centre pools. The hoist offers a fully automated electric control system with a high quality 316 stainless steel construction offering a durable investment with a large 250kg carrier bed able to cater for up to 99% of user requirements.   It comes with a a battery backup and manual system to allow safe operation in the case of power failure. The SR-10 Pool hoist is a state of the art construction and is a durable investment for organisations that have the safety, comfort and health of their users and staff as a primary concern. Benefits

• Fully automated providing smooth operation of patient handling
• Large seat design (no slings) for comfort and stability
• Max 180 degree swivel turn
• Safe design & sustainable engineering- no residues
• Easy adjustment by staff, carers and clients
• Maximum comfort and client safety and security

Features

• 10 automated fully adjustable functions
• Water protected LINAK IPX6 Actuators (no fluids)
• Made with 304 grade stainless steel
• Operated by 240v power with battery and manual backup
• Simple to use hand controller
• Manual backup system in loss of power
• 250kg working load

Specification

• Seat Width – 55cm
• Seat Minimum Height - 65cm
• Seat Max Height – 95cm
• Seat Weight Capacity 300kg
• Seat Tilt angle – 15 Degrees
• Backrest angle – 150 Degree’s
• Leg Rest Width – 55cm

Other Specs

Motor:	24V Permanent Magnet Motor
Actuator:	24V Electric Actuator
Battery charger:	24V 30A battery charger
Backup batteries:	12V AGM Battery x 2
Materials:	316 Stainless steel base plate, base cover, hoist arms and seat Galvanized mild steel main pole
Safe Working Load:	250kg

Benefits

• Minimise Manual Lifting
• Facilitate ease of transfer from bed to chair
• Easy adjustment by staff, carers and clients
• Maximum Comfort and client security
• Increases safety and reduces transfer

Features

• 10 automated fully adjustable functions
• Simple Push Button Operation
• Water Protected IPX6 Actuators
• Operated by 12v Lithium Re-chargeable battery
• Pivot Armrest
• Hospital Grade Lockable castors
• Removable Bed Pan Lid
• 200kg Max Load Limit

Specification

• Seat Width – 55cm
• Seat Minimum Height - 65cm
• Seat Max Height – 95cm               
• Seat Weight Capacity 200kg
• Seat Tilt angle – 15 Degrees     
• Backrest angle – 150 Degree’s
• Leg Rest Width – 55cm      

Product Description 316 Stainless steel swimming pool grab rail for concrete and fiberglass pools & spas with entry steps.  Designed to assist users as a support for safe entry into into pools and stairwells in aquatic environments Specifications

• 316 Stainless steel tubing
• 38mm diameter tubing 1.2mm thickness
• We can custom design and build railings to any specification or pool entry design.

Product Description The SR-4 ABI Patient Recovery Enclosure is a sturdy and customisable solution for facilitating the safe treatment of patients with Acute Brain Injury, Huntington Disease, Cerebral Palsy, Epilepsy and other mental or physical conditions. The unit is composed of four modulated padded walls with split level access that connects to form a safe and secure patient enclosure. Benefits •Split level modulation for eye level observation and better patient experience. •Maximises patient safety and comfort •Quick and easy patient access •Easy adjustment by staff and carers •A customisable setup to adjust to room requirements •Fluid proof, stain and static resistant and easy to clean Features •100mm modulated wall padding •Covered in a reinforced hospital grade vinyl fabric •Quick release buckles •Heavy duty hospital grade lockable wheels •Customised bracket hinge system for reinforcedstrength •Deluxe Polysoft mattress Specification •1st Level Height – 1330mm •2nd Level Height- 600mm •Unit Length- 2400mm •Unit Width- 1180mm •Mattress size- 1070mm x 2200mm

Product description. For use in patient mobility transfer from chair to bed or car. Our Slide boards come in a self contained storage unit with pre-fitted slots for tidy storage for safety and convenience. Made from sturdy construction materials and coated in white laminate for ease of slide and cleaning with carved  handle holes for easy grip. Specifications

• Sturdy MDF  12mm thick panel
• Easy slide laminate
• hand grip slots
• range of sizes to suit.

Product Description Custom built foldable steps that attach to the existing vehicle step. The steps are constructed from powder coated metal and are designed to lower the step for vehicles such as buses or vans. To assist with passenger mobility and safety when onboarding transport vehicles. The step aids entry to and exit from a vehicle. It features anti-slip tape on the tread to prevent slips and falls. Specifications

• Solid Steel Construction
• Powder coated
• Non slip tape for safety
• Customisable to fit any van or bus

Product Description   Specifications

Product Description   Specifications

Product Description   Specification

Product Description   Specification

Product Description   Specifications

Product Description 1000 Denier Cordura/Foam construction with snap stud belt loop attachment. Side release buckle with shock cord radio retention. Specifications

• Small, Medium and Large.
• Custom colours available.

Product Description 1000 Denier Cordura/Foam construction with snap stud belt loop attachment. Side release buckle with shock cord radio retention. Specifications

• 1000 Denier Cordura Foam construction
• Snap stud belt loop attachment.
• Side release buckle with shock cord radio retention.
• Small, Medium and Large.
• Custom colour and design options available.

Product Description Stretch fit Spandex Leg Carrier for radio. Can also fit baton & OC Spray. Black, Product Specifications

• Requires waist and thigh measurement
• Spandex/ Cordura construction
• Milspec tape and stitching

Product Description Cordura chest pack for easy access to radio on work sites or crowd scenes. Black, Red, Blue, Tan, Flouro Yellow and Orange colours available. Specifications

• 1000D Cordura construction
• Milspec tape and stitching
• Range of colours

Product Description 1000 Denier Cordura/Foam construction with snap stud belt loop attachment. Side release buckle with shock cord radio retention. Custom colours available Specifications

• Sandwich of 1000D Cordura
• 3mm EVA foam
• 420D Nylon 3/4” MIL-T-5038 Type 3 tape
• 18mm plastic side release buckle
• 3mm shock cord
• 38mm polyester webbing
• Federal standard N⁰7551 Stitches, seams and stitching

Product Description Specifications

• Sandwich of 1000D Cordura, 3mm EVA foam
• Federal standard N⁰7551 Stitches, seams and stitching
• 420D Nylon 3/4” MIL-T-5038 Type 3 tape
• 18mm plastic side release buckle
• 38mm polyester webbing

 

Product Description   Specifications

• 150knot UAV (Blue/White)
• 350knot UAV (Orange/Yellow)

Product Description We are the makers and manufacturers of Aerochute Powered Paragliders. We make Ram air canopies specifically for the Aerochute www.aerochute.com.au. We also custom make canopies for all paragliding and parachuting needs. Specifications Ram-air canopies are rectangular as opposed to round, and as the canopy moves forward and down air is forced into it creating an inflated wing. The shape and design of Ram-air canopies result in a type of parachute that is highly maneuverable and makes their users more like pilots and less like passengers.

Product description The medical emergency team bag (MET) is designed as a requirement for first response teams in a modulated design with drug bag section to deliver priority requirements in the most accessible way. When seconds count the MET bag provides easy access to multiple compartments for easy navigation of medical solutions all self contained in a medical grade highly visible PVC constructed material easy to clean and manage. Specifications

• Made from ripstop patterned PVC material
• Modulated compartments
• Side pockets with elastic tops for gloves and other regularly accessed tools
• HDPE sleeve inserts for storage of medicinal carriage
• Can be custom designed to suit all medical team requirements.

Product Description Our Mobile Intensive Care Ambulance Bags can are custom made to suit the carry of crucial requirements of air medical and ambulance medical professionals. Made from highly durable military grade no abrasive cordura the bags are designed on the SAS dive (war) bags made to withstand the rigors of first response medical teams. Specifications

• Military grade Cordura
• Internal compartment dividers and pockets for organisation
• Easy access zip
• Product can be custom made to suit specific requirements

Product Description   Specifications

Product Description   Specifications

Product Description   Specifications

Product Description   Specifications

Product Description   Specifications

Product Description   Specifications

Product Description   Specifications

Product Description   Specifications